IMC Networks AccessConverter, TX/3 + FX-SM1310/LONG-SC Manuál s instrukcemi stáhnout pdf (Strana 7)

Fiber Uplink Port

The LED indicator for the fiber uplink port is located on the RJ-45 connector of the

downlink port next to the power connector. There are four LED functions for the

fiber uplink port.

The fiber uplink port LED functions are as follows:

•

Glows green when a link is established on the fiber port.

•

Glows green indicating a valid link, then blinks green when activity is detected

on the fiber port.

•

When the LED is OFF, there is no link (check cabling, check remote device).

•

Blinking LED - indicates the device attached to the other end of the fiber maybe

passing Link Fault Propagation, or generating noise onto the fiber. This normally

happens when there is a media converter at the fiber end of the link. Connect

the second port of the converter onto a valid device to generate link.

Twisted Pair Uplink Port

When the Access Converter/3 is configured with a twisted pair uplink port, the LED

location and functionality is the same as that for the downlink ports.

1 2 3 4 5 6 7 8 9 10

Žádné komentáře

IMC Networks AccessConverter, TX/3 + FX-SM1310/LONG-SC Manuál s instrukcemi Strana 7